The infrared bed control BIF8plus allows wireless operating of an electrically adjustable bed by means of an infrared control unit. The BIF8plus is plugged into the motor control of the bed instead of or parallel to the wired manual control. BIF8plus provides up to eleven different switching functions for this purpose.

 

Characteristics: 

Freely selectable multiple / single function assignment 

Safety circuit so that safe operation is ensured even with environmental control devices.

Individually configured for most electrically adjustable beds available.

Safety function:

• Automatic shutdown of a continuous actuation: A permanent function by continuously pressing a function key is interrupted after a predefined time.
• Multiple actuations of the same functions: To ensure safe operation by means of infrared or Easywave, a short compulsory pause is inserted between the repeated operations of the same functions in sequence.
• Different device addresses: If several beds with a BIF8plus are used in a room, it must be ensured that each bed responds only to the corresponding remote control. For this reason, the reception address can be set.
• Monitoring switching contacts: BIF8plus detects when one of the switching contacts is no longer electrically cut off due to a defect. In this case, the activation of the switching contacts is deactivated.
• System self-monitoring: In the BIF8plus safety measures were taken for a possible disturbance of the control unit. A watchdog module deactivates the activation of all switching contacts in case of a failure.
• Groups of switching functions and settings can be conveniently set or changed by means of a USB interface using PC software (Windows).

  Mostly, the standard functions headboard up/down, level up/down and foot section up/down are operated. Depending on the type of bed, combinations or special functions are also possible.

Technical data:

• Power supply: mains unit 100-240 V AC, stab. 12 V DC / 700 mA, IEC 60601-1 compliant 
• Switching contacts 48 V DC / 5A 
• 11 functions, 1 activation contact 
• Infrared coding 38 kHz, RC5 code 
• Housing IP65 (protected against jets of water from all directions), RAL9002, front clip for mounting 
• Dimensions: 145 x 105.9 x 45.8 mm
• Available for beds from Bock, Völker, Burmeier, ISKO Koch, Sacon and many more.